One Preowned Ikeda Radial Arm Drill
Model 1300
Year 1977
Serial Number 77099
Specifications
Maximum distance between the outer circumference of column sleeve and the center of the spindle: 54-1/2"
Minimum distance between the outer circumference of column sleeve and the center of the spindle: 10-3/4"
Maximum distance between the lateral side of the column and the center of the spindle: 52-5/8"
Minimum distance between the lateral side of the column and the center of the spindle: 9"
Maximum distance between the spindle end and the upper surface of the base: 56-3/4"
Minimum distance between the spindle end and the upper surface of the base: 15-1/4"
Stroke of spindle: 12"
Working surface of the base: 57" x 36"
Diameter of column sleeve: 13-5/8"
Bearing diameter/quil: 2-3/8" / 3-5/8"
Taper of the hole in the spindle: MT No. 5
No. of steps and speed range of spindle: 12 steps, 30 - 1,440 prm
No. of steps and feed range of spindle: 4 steps, 0.004 - 0.021 in/rev.
Spindle motor: 5 HP
Arm elevating motor: 1 HP
Clamping motor: 1/6 HP
Height of machine: 96"
Floor area required for base: 81-5/8" x 36"
Height of base: 8-1/2"
Distance between the column center and the left end of base: 15-1/2"
Distance between the column center and the right end of base: 62-1/4"
Distance between the column center and the arm tip: 68-3/4"
Weight: 7,700 lbs
Voltage: 220/440
Equipped With
Power Elevation
Power Clamp
Good Condition
Price: $12,500.00
Delivery: Stock, Subject to Prior Sale
Terms: Net before Shipment
F.O.B.: Warehouse
For more information and pricing contact,
Sales
3171 Green Valley Road
Birmingham, AL 35243
Office: (205) 968-3570
Fax: (888) 235-8257
E-mail: Sales@MachineToolsSouth.com
Sales
ALL MACHINES ARE SUBJECT TO PRIOR SALE. EVERY MACHINE, UNLESS OTHERWISE SPECIFIED, IS OFFERED SUBJECT TO OUR GUARANTEE THAT IF FOUND TO BE MECHANICALLY UNSATISFACTORY WITHIN 30 DAYS AFTER SHIPMENT, SAME MAY BE RETURNED, FREIGHT PREPAID FOR FULL CREDIT. ALL MACHINES RETURNED TO US MUST BE IN AS GOOD A CONDITION AS WHEN SHIPPED.